high temperature wearing resistant metal repair compound repairing putty agent

BD115 high temperature abrasion wearing resistant metal repair epoxy compound used in repairing and protecting various metal casting defects and parts wear,corrosion and fracture.

http://www.wearcoating.com/case-of-desulfuration-pipeline-repairing-coatings/high_temperature_wearing_resistant_metal_repair_compound_4614.html

The range of application for BD115 anti wear abrasion high temperature resistant metal repair agent epoxy compound:
It is suitable for the repairing of various metal casting defects and parts wear,corrosion,fracture, with the higher strength and
excellent wear&corrosion resistance and aging resistant properties after repairing,,can do various mechanical processing
together with substrates.

Performance index:

product name physical state standard packaging volume
(cm3)
operational time limit
(25℃)
usable time
(25℃)
BD115 high temperature
metal repair agent
rebuilding compound
paste 250g/set
Two-component
178 45min 24h
color density
(g/cm3)
compressive strength
(kg/cm2)
GB1041-2008
shear strength
(kg/cm2)
GB7124-2008
bending strength
(kg/cm2)
GB1042-1999
hardness
(Shore D)
ASTM-D-2556
working temperature
(℃)
metal gray 1.41 963 146 479 86 -60~300

How to use of BD115 metal repair agent high temperature abrasion wearing resistant compound:
1.Surface treatment: 
Do the coarsening treatment on the pending-repair or needing-bonding area,then clean it by cleaning agent.

2.Configuration: 
According to the mass ratio A:B=4:1 or volume ratio A:B=4:1, make A and B two components mix uniformly,then use it up within specified
operation time limit.

3.Coating: 
Make the mixed-up material spread coating on the pending-repair areas layer by layer,the first layer should be compacted,make it infiltrate fully
with the substrates.If the following working procedure needs machining,should keep out appropriate machining allowance.

4.Curing: 
Curing for 2 hours at the temperature of 25-30 degree,then heat it up to the temperature of 80 degree and keep this temperature for 2 hours or it can be
put into using after curing for 24 hours at the temperature of 25-30 degree,if the temperature is low,should heat it up or prolong the curing time to promote
the curing.

Product packaging picture of our BD115 high temperature wear abrasion resistant metal repair agent epoxy compound:

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s