BD7045 anti wear abrasion corrosion impact resistant coating epoxy putty compound used in repairing and protecting power plant slurry pump guard plate:
The February of 2017,based on the serious erosive wear of a batch of slurry pumps and guard plates from Ordos Qipanjing power plant,they decided to
use the BD7045 slurry pump repair special anti wear abrasion resistant coating which produced by Xiangyang City Hundred Shield Coating Material Co.,Ltd
to do repairing,the first batch of guard plate was sent to Xiangyang City Hundred Shield Coating Material Co.,Ltd for repairing and trying out.According to
the previous repair slurry pump spare parts service condition,the slurry pump guard plate service life after repairing is equivalent to even more than new
workpiece service life.
BD7045 slurry pump wear resistant repair coating is the high performance abrasion resistant,corrosion resistant material which compounded
by high performance NDI-PTMG modified epoxy resin and abrasion wearing resistant aggregate from the core technology of Xiangyang City
Hundred Shield Coating Material Co.,Ltd.Used in repairing the mining use slurry pump which suffers from serious erosive wear,the restored life
of repairing workpiece full size generally can reach to 1.5 times more than new workpiece service life.
1.Do the sand blasting treatment for guard plate surface,clean it by cleaning agent and dry it by airing,the construction surface should be clean,
dry and coarsening.
2.Weigh the weight of A and B two components of high strength special abrasion resistant prime coat BD4261 and mix them uniformly according to
the specified mixing weight ratio,make it be blade coating on the treated surface of pending-construction parts.
3.Weigh the weight of A and B two components of BD7045 slurry pump repair special anti wear abrasion resistant epoxy coating and mix them uniformly
based on the specified mixing weight ratio,make the uniform-mixed materials be blade coating on the surface of prime coat,then use the scraping knife to
repair the coating surface to be smooth,make sure the coating smooth connection
4.Brush coating the special top coat:
5.The slurry pump anti abrasion wear resistant protective coating can be curing at room temperature,it can also heat up for curing,(heat up for curing
can improve 30% combination property,if the condition is allowed,you should try to heat up for curing).