The construction case of BD407 anti abrasion corrosion resistant epoxy coatings use in slurry tank wear corrosion repairing:
The slurry tank of Panzhihua Longmang mining industry suffers erosive wear and corrosion in the process of using,the protective scheme: do the corrosion prevention on the bottom layer and do the abrasion resistance on the surface layer.Make a layer of BD407 anti heat corrosion resistant epoxy ceramic coatings compound on the bottom layer of the tank body first,then paste the wear resistant ceramic chip on the surface of BD407 anti corrosion chemical resistant ceramic epoxy compound coating.
Construction technology of our BD407 anti corrosion chemical resistant ceramic epoxy compound coating:
1.Polish and clean the inner wall of the tank body.
2.Configure BD407 anti chemical corrosion resistant epoxy ceramic coatings compound and scrape coating on the inner wall of the tank body.
3.After the BD407 anti corrosion chemical resistant ceramic epoxy compound coating curing,find out whether there is defect or not,
do the coverage repairing with the BD407 for the defective parts.
4.Configure BD121 anti chemical wear resistant ceramic tile bonding epoxy compound adhesive and scrape coating on the surface of
BD407 anti corrosion chemical resistant epoxy ceramic coatings compound uniformly.
5.Make the ceramic tiles paste on it uniformly,and knock on it to be flat and compacted with rubber hammer.
6.Curing for 24 hours,when the temperature is low,should take properly heating measures to promote the curing.