power plant concentric reducer rubber lining repair wearing compound coating

BD407 high temperature anti chemical corrosion resistant epoxy coatings used in
power plant desulfurization system concentric reducer ceramic rubber lining repairing and protecting


At the end of Oct.2014,when the state-owned investment Inner Mongolia Daban power plant is overhauling,find that the desulfurization
system concentric reducer inner rubber lining is badly broken,in order to maintaining the power plant smooth running,they decide to do
the partial restoration for the damaged parts first,then make a layer of wear & corrosion resistant coating.

Construction process:
1.Surface treatment: Clean up the rusting,dirt etc.impurity on the surface of substrates first,then do the sand blasting,polishing etc.
roughing treatment.Clean it by cleaning agent and dry it by the airing,make the construction part be clean,dry and no dirty,
reach to ideal bonding effect.

2.The preparation of anti corrosion resistant coating undercoat:
Make the BD407 high temperature anti chemical corrosion resistant coatings mix uniformly according to the mass ratio A:B=4:1,
smear it on the surface of the pending-repair substrates.

3.The preparation of high temperature flakes anti corrosion resistant coating:
After the BD407 anti corrosion chemical resistant epoxy coating initial curing,make the BD408 flakes anti corrosion resistant repair coating
mix uniformly according to the mass ratio A:B=4:1,and be coating on the surface of BD407 adhesive layer,the adhesive layers should be
compacted along one direction,avoid appearing the holes

4.The preparation of wear resistant coating:
After the BD408 high temperature flakes anti corrosion resistant epoxy coating initial curing,scrape coating a layer of BD705
anti wear abrasion corrosion resistant epoxy repair coatings on its surface.

It can be put into using after complete curing (curing for 24 hours at room temperature)

Performance index:

Product Name Color Physics Status Packaging Operation time limit
Curing time
BD407 anti
corrosion resistant epoxy repair coating
Grey/blue/yellow Semi-fluid 20 kg 25 min 24 hours


Compressive strength
tensile strength
Shear strength
Bending strength
(Shore D)
Working temperature
1.32 836 316 175 512 78 -60~100

Construction case photos show:



Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s