mineral processing and other fields has been widely used.The abrasion resistant technology of magnetic separator roller surface
bonding abrasion wear resistant ceramic tile has been validated and approved by the market.But due to the recent market
competition is intense,make the big price war,cause some manufacturers provide the inferior ceramic tile and adhesive to clients,
lead to appearing problems etc.phenomenon in the process of customers using.Seriously affect the normal operation of enterprises,
have a significant impact to the reputation of the whole industry.
these places.Avoid causing unnecessary losses.
because it is the whole paste,causing some parts of the ceramic pieces and metal base material can’t fit closely together,
but there is gap in the middle,cause the bonding is not fastness,it’s easy to fall off during using.Even though can be compacted
layer by layer,the result is that roller surface after sticking is rugged,cause nonuniform logistics flow in the process of using,
can’t get good mineral separation effect.
quickly in the process of using,ceramic tile alumina composition is not up to standard,the problem such as wear resistance is not
enough.cause the working life can’t meet the requirements.
recommend the adhesives to the customers directly,and some cheap glue on the market is generally used in the pipes and chute where
suffers from not large impact force,but due to the magnetic separator in the process of working,material falls down from a height
by vertical,suffers from the larger impact force,if the adhesive toughness is not enough,will fall off by shock.
wearing resistant ceramic tile bonding repair compound epoxy adhesive to stick ceramic tile to achieve the better using effect.
Then because we don’t have the matched ceramic tile,use the ceramic tile manufacturers matched adhesive to paste the ceramic tile.
The result is that half of the ceramic tile falls off after using less than two months.The adhesive just takes up a small fraction of the cost
bonding the ceramic tile,must choose the high quality adhesives,don’t be penny wise and pound foolish,cause the project failure.
epoxy adhesive research & development and production for more than ten years,according to customers’ demands in different
working conditions,according to the working temperature,the adhesive viscosity,stress distribution,the different color requirements,
produces a variety of adhesive,meet customers’ different requirements.
Product packaging actual photo of BD121 wear abrasion resistant ceramic tile repair bonding epoxy adhesive: