BD114 metal copper rebuilding repair compound wear abrasion resistant ceramic epoxy coating
Product description of our BD114 copper metal anti abrasion wear epoxy ceramic coating rebuilding repair compound:
It’s the high performance polymerization metal materials compounded by various alloy material and modified
toughening heat resistant resin,suitable for the repairing and rebirth of the brass, bronze casting and process
castings defects.The color after repairing is basically the same as the substrates,with the very high strength
and excellent wear&corrosion resistance and aging resistant properties,can do various mechanical processing
together with substrates.
how to use:
Surface treatment: Do the coarsening treatment on the pending-repair surface and clean it by cleaning agent.
2.Configuration: According to the mass ratio A:B=6:1 or volume ratio A:B=4:1, make A and B two components
mix uniformly,then use it up within specified operation time limit.
3.Coating: Make the mixed-up material spread coating on the pending-repair areas layer by layer,the first layer should be compacted,make it infiltrate fully with the substrates.
If the following working procedure needs machining,should keep out appropriate machining allowance
4.Curing: Cure for 8 hours at the temperature of 25～30 degree before doing machining, cure for 24 hours before putting it into use,if the temperature is low,should heat it up or
prolong the curing time to promote the curing.
Two-component,250g/set,8 sets/carton or 16 sets/carton.
Sealed storage in the cool and dry place.The warranty period is 24 months.Avoid placing it upside down,
knocking against and transporting it as a non-dangerous product during transportation.
Product packaging photo of BD114 metal copper wear resistant two parts paste repair putty epoxy compound