BD116 metal iron high temperature resistant repair agent rebuilding compound epoxy coating
Product description of our BD116 high temperature resistant iron metal repair agent epoxy coating compound:
It’s the high temperature high performance polymerization metal materials compounded by various alloy material
and modified toughening heat resistant resin.The highest temperature resistance is 300 degree,suitable for the
repairing of gray iron,ductile iron,cast iron parts defect and iron parts wear under the high temperature
working condition.The color after repairing is basically the same as the substrates,with the very high strength and
excellent wear&corrosion resistance and aging resistant properties,can do various mechanical processing together with substrates.
How to use:
1.Surface treatment: Do the coarsening treatment on the pending-repair or needing-bonding area,
then clean it by cleaning agent.
2.Configuration: According to the mass ratio A:B=4:1 or volume ratio A:B=4:1,make A and B two components mix uniformly,
then use it up within specified operation time limit.
3.Coating: Make the mixed-up material spread coating on the pending-repair areas layer by layer,the first layer should be compacted,make it infiltrate fully with the substrates.
If the following working procedure needs machining,should keep out appropriate machining allowance
4.Curing: cure for 2 hours at the temperature of 25～30 degree,heat it up to the temperature of 80 degree and keep this temperature for 2 hours or cure for 24 hours at the temperature of 25～30 degree before using,if the temperature is low,should heat it up or prolong the curing time to promote the curing.
Two-component,250g/set,8 sets/carton or 16 sets/carton.
Sealed storage in the cool and dry place.The warranty period is 24 months.Avoid placing it upside down,
knocking against and transporting it as a non-dangerous product during transportation.
Product packaging photo of BD116 metal iron high temperature resistant two parts epoxy repair putty paste compound: