BD112 steel metal repair ceramic epoxy coating rebuilding compound
Product description of our BD112 metal steel repair rebuilding compound ceramic epoxy coatings:
It’s the high performance polymerization metal materials compounded by various alloy material and modified toughening
heat resistant resin,suitable for the repairing of various carbon steel, alloy steel, stainless steel.Such as fill up casting
defects and repair parts wear,scratch, corrosion, rupture. The color after repairing is basically the same as the substrates,
with the very high strength and excellent wear&corrosion resistance and aging resistant properties,
can do various mechanical processing together with substrates.
How to use:
1.Surface treatment: Do the coarsening treatment on the pending-repair surface and clean it by cleaning agent.
2.Configuration: According to the mass ratio A:B=7:1 or volume ratio A:B=4:1,make A and B two components mix uniformly,
then use it up within specified operation time limit.
3.Coating: Make the mixed-up material spread coating on the pending-repair areas layer by layer,the first layer should be compacted,make it infiltrate fully with the substrates.
If the following working procedure needs machining,should keep out appropriate machining allowance
4.Curing: Cure for 8 hours at the temperature of 25～30℃ before doing machining, cure for 24 hours before putting it into use, if the temperature is low,
should heat it up or prolong the curing time to promote the curing.
Two-component,500g/set,8 sets/carton or 16 sets/carton.
Transportation and storage:
Sealed storage in the cool and dry place.The warranty period is 24 months.Avoid placing it upside down,
knocking against and transporting it as a non-dangerous product during transportation.
Product packaging photo of BD112 high strength metal steel repair putty agent two parts paste epoxy compound: