BD113 metal aluminum rebuilding repair compound epoxy ceramic coatings
Product description of our BD113 aluminum metal repair compound epoxy coating:
It’s the high performance polymerization metal materials compounded by various alloy material and modified toughening
heat resistant resin,suitable for the repairing of various aluminum casting defect and aluminum parts wear.
The color after repairing is basically the same as the substrates,with the very high strength and excellent wear&corrosion
resistance and aging resistant properties,can do various mechanical processing together with substrates.
how to use:
1.Surface treatment: Do the coarsening treatment on the pending-repair surface and clean it by cleaning agent.
2.Configuration: According to the mass ratio A:B=6:1 or volume ratio A:B=4:1, make A and B two components mix uniformly,
then use it up within specified operation time limit.
3.Coating: Make the mixed-up material spread coating on the pending- repair areas layer by layer,the first layer should be compacted,make it infiltrate fully with the substrates.
If the following working procedure needs machining,should keep out appropriate machining allowance
4.Curing: Cure for 8 hours at the temperature of 25～ 30 degree before doing machining, cure for 24 hours before putting it into use, if the temperature is below 15 degree,
can’t cure fully,should heat it up to promote the curing(such as:bake it for 2 hours with the iodine tungsten lamp)
Two-component,250g/set,8 sets/carton or 16 sets/carton.
Transportation and storage:
Sealed storage in the cool and dry place.The warranty period is 24 months.Avoid placing it upside down,
knocking against and transporting it as a non-dangerous product during transportation.
Product packaging photo of BD113 high strength metal aluminum repair putty agent two parts paste epoxy compound: