super high temperature wear resistant epoxy sealing compound repair agent

BD767 super high temperature epoxy sealing compound repairing agent

http://www.wearcoating.com/industrial%20repair%20agent/super_high_temperature_epoxy_sealing_compound_repair_agent_4401.html

Product description:
Two-component,inorganic bonding material.the A component is white(or light red) powder(125g),
the B component is translucent liquid(125g) Temperature resistance can reach to 1200℃.Used in the defect filling
and bonding of metal and ceramic under high temperature,also used in repairing of high temperature equipment
like blast furnace lining,metal solution temperature measuring probe and so on,the joint should be designed for
the socket or mosaic structure during bonding.

Mixing ratio of our BD767 super high temperature wear resistant
sealing repair epoxy compound agent:

Can adjust it between A:B=1 : 1.5 and A:B=1.5 : 1 according to the requirements.

Curing condition:
cure at room temperature for 2~4 hours,and heat it up to the temperature of 60~80 degree and keep this temperature for 2 hours,then heat it up to the temperature of 150 degree and keep this temperature for 2 hours,after that cool it down to the room temperature slowly.

Packaging specification:
Two-component,250g/set, 16 sets/carton

Transportation storage:
Sealed storage in the cool and dry place.The warranty period is 24 months.Avoid placing it upside down,
knocking against and transporting it as a non-dangerous product during transportation.

Product packaging photo of BD767 super high temperature resistant two parts sealing compound epoxy repair agent:

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s