BD919N high strength rubber bonding repair agent epoxy anti abrasion wearing resistant compound
Packaging specification of BD919N high strength anti abrasion wearing compound rubber bonding epoxy repair agent:
1.Two-component,250g/set,packed in a small plastic drum,A component: 200g/drum,B component: 50g/drum.
2.We could offer professional customized packaging and sub-package services based on users’ requirements.
Performance features of BD919N high bonding strength epoxy coating rubber anti wear abrasion resistant repair compound:
BD919N high strength rubber bonding repair agent abrasion wear resistant epoxy compound is the two components polyether type
fast curing polyurethane composites,good adhesion,high strength,wearing abrasion resistant,aging resistant.
Used for the splicing and repairing of steel core,whole core and common conveyor belt vertical and horizontal direction tear,as well as
repairing and joint sealing of the conveyor belt surface wear,chipping,belt edge abrasion,belt surface perforation,repairing polyurethane
composite pipeline,power cable,rubber covered roller and repairing other rubber products.
1.The usable time of this product should be controlled within 8 min from mixing and using up.
2.If the temperature is too low,can use the iodine tungsten lamp to bake the pending-repair part in advance to improve the substrates
temperature,can also heat A and B component up to the temperature of about 30 degree separately before using,then mix them.can also
bake and heat it up to the temperature of 40-60 degree to expedite the curing speed after repairing.
3.It can’t be forced without curing completely (within 2 hours).
4.The product storage period is 12 months under the condition of room temperature,dry and sealing.
5.Do not used for the place of strong acid,strong alkali,strong oxidizing.
6.The highest working temperature is not more than 85 degree.
Construction case photos show of BD919N high strength rubber bonding repair compound wear resistant epoxy coating: