high temperature wear resistant epoxy resin compound inorganic adhesive

BD1201  high temperature abrasion resistant repair compound
inorganic epoxy adhesive


product description of BD1201 wear high temperature resistant repair epoxy compound inorganic adhesives:
Two-component, inorganic bonding material.the A component is white powder,the B component is
translucent liquid.Temperature resistance can reach to 1200 degree.Used for high temperature instrument
encapsulation,when the temperature increases,the resistance has small change,the curing product has good
water resistance.

The ratio A:B=2:1 based on customers’ requirements.

Operation time: 20~30 min

Curing condition:
Curing for 2 hours at room temperature,and heat it up to the temperature of 60~80℃ and keep this temperature for 3 hours,then heat it up to the temperature of 150℃ and keep this temperature
for 2 hours,after that cool it down to the room temperature slowly.

Packaging specification:
250g/set, 16 sets/carton or 10Kg/set.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s