anti wear corrosion resistant ceramic particle filled paste epoxy coating

BD406 wear abrasion corrosion resistant ceramic particle epoxy coating

http://www.wearcoating.com/abrasion%20wear%20resistant%20coating/BD406_wear_corrosion_resistant_ceramic_particle_coatings_4326.html

Product description of our BD406 anti wear corrosion resistant epoxy compound ceramic coatings:
It’s the high performance wear&corrosion resistant polymerization ceramic materials compounded by various
high performance wear resistant,corrosion resistant material(such as:ceramic,silicon carbide,carborundum, titanium alloy)
and modified toughening heat resistant resin.Repair various pumps,valves, pipeline, heat ex-changer end plate, blade of suffering from normal temperature corrosion,also can do large areas pre-protecting.

How to use:
1.Surface treatment: Do the rust-cleaning and coarsening treatment on the pending-repair area,then clean it by cleaning agent

2.Preparation: According to the mass ratio A:B=5:1 or volume ratio A:B=4:1, make A and B two components mix uniformly,
then use it up within specified operation time limit.

3.Coating: Make the mixed-up material spread coating on the pending-repair areas layer by layer,the first layer should be compacted,make it infiltrate fully with the substrates.

4.Curing: Cure for 24 hours at the temperature of 25~30 degree before putting it into use, if the temperature is low,should heat it up or prolong the curing time to promote the curing.

Product packaging photo of BD406 anti chemical wear corrosion resistant epoxy ceramic coatings

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s