BD1010 metal wear resistant repair compound epoxy caster adhesive
Product description of BD1010 metal abrasion resistant repair epoxy compound caster adhesives:
It’s the high performance polymeric metal repair material which compound by alloy powder and toughening
heat resistant resin.With high bonding strength,can do machining.
Product features of BD1010 metal anti wear abrasion repair caster adhesive epoxy compound:
1.The material after curing has higher strength,can do various machining
2.The range of application is wide,suitable for the repairing and rebuilding of various metal material defect.
|Product name||Color||Physical state||Packaging||Volume
|Operation time limit
|BD1010 molder adhesive||A:gray,B: white||Paste||2Kg/group||1400||60 min||24 hours|
How to use:
1.Surface treatment:Do the coarsening treatment on the pending-repair surface,then clean it by cleaning agent.
2.Configuration: According to the mass ratio A:B=1:1 or volume ratio A:B=1:1, make the A and B two components
mix uniformly,then use it up within specified operation time limit.
3.Coating: Make the mixed-up material be coating on the pending-repair part layer by layer,
the first layer should be compacted,make it infiltrate fully with the substrates.
If the following working procedure needs machining,should keep out appropriate machining allowance.
4.Curing:Can do machining after curing for 12 hours at the temperature of 25-30 degree,
it can be put into using after curing for 24 hours,if the temperature is low,should heat it up or prolong
curing time to promote the curing.
Two-component,A component: 1Kg,packed in a plastic drum,B component: 1Kg,packed in a plastic drum,
or A component: 5Kg,packed in a plastic drum,B component: 5Kg,packed in a plastic drum,or A component: 10Kg,
packed in a plastic drum,B component: 10Kg,packed in a plastic drum.
Product packaging photo of BD1010 metal abrasion resistant repair putty compound caster adhesives: