elastic flexiable bonding wear resistant repair epoxy adhesives

BD818 elastic flexible bonding repair compound epoxy adhesive


Performance features of BD818 elastic flexible epoxy repair compound bonding adhesives:
1.Two-component, curing at the room temperature.
2.The curing speed is moderate,with good elasticity and high bonding strength.
3.The adhesive range is wide, with good adhesion to rubber,leather,fabric,foam plastic,metal and so on.
4.With excellent water resistance,oil resistance,aging resistance,with good thermal conductivity,
and has fire resistance
5.With good manufacture-ability, convenient for using.

Product usage of our BD818 elastic flexible bonding epoxy adhesive repair compound:
Used in the self-adhesion, each-adhesion and sealing of metal,ceramic,cement,stone,glass,leather,rubber,
fabric,hard plastic,foam plastic and other materials.

How to use:
1.Clean the adherend surface,clean up the oil stains,dust and other impurity

2.According to the mass ratio A:B=3:1,mix and stir it uniformly in the dry and clean vessel
(be sure not to have water and water vapor),there is about 30 minutes usable time for the adhesive solution after
mixing at the temperature of 25 degree

3.Make the mixed-up adhesive solution brush coating on the adherend surface,fold it,knock it with the rubber hammer,
place it for more than 24 hours at the room temperature.

4.If you need to increase the adhesive force of the surface,brush coating the treatment agent on the adherend surface
before coating adhesives,coating with BD818 after drying it by airing.

Performance index:

project index test standard
Appearance uniform viscous liquid,impurity-free visual inspection
viscosity(Pa·s:  25℃) 1.8±0.3 GB/T2794-1995
surface drying time(min) 45 GB/T2765-1995
peel strength(Mpa) 9.0±2.0 GB/T2790-1995
 breaking elongation(%) ≥200 GB/T2788-1995
compressive strength(MPa) 50 GB/T2775-1995

Packaging specification:
Two-component,400g/group,A component: 300g, B component: 100g,or agreement packaging(plastic cans or plastic jugs)

1.If necessary,put the main agent and curing agent into the temperature of 50℃ for preheating,then stir it uniformly,
weigh it according to the given proportion,then stir it uniformly.

2.Cover the bung of the main agent and curing agent tightly in time,in case of the moisture and
impurity polluting the adhesives.

This product is general chemicals,should pay attention to waterproof and fire prevention during transportation and storage,
save it in a cool and dry place,the storage period is 12 months.

Product packaging photo of BD818 elastic flexiable bonding wear resistant repair epoxy adhesives


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s