anti wear abrasion high temperature resistant ceramic tile bonding epoxy adhesive

BD400 welding ceramic lining abrasion wear high temperature resistant bonding epoxy adhesive

http://www.wearcoating.com/high%20temperature%20resistant%20adhesive/welding_ceramic_lining_high_temperature_resistant_adhesive_4360.html

performance features:
1.With imported high performance heat resistant resin as main materials preparation.
2.Can cure at the normal temperature,can also heat for curing.
3.The highest temperature resistance is 350 degree,suggest working temperature is under 320 degree.
4.The curing has excellent water&acid resistance

product usage of our BD400 high temperature abrasion wear resistant welding ceramic liner epoxy bonding adhesives:
Used in the paste of wear resistant ceramic chip on the equipment of suffering from material erosive wear under
the high temperature working condition of electric power, metallurgy, cement, mining and other industries,
or welding the bottom lining and seal of ceramic,or used in the bonding and sealing between metal and metal,
metal and other inorganic materials under other high temperature working condition.

performance index:

product name physical
state
standard
packaging
operation
time limit
(25℃)
usable
time
(25℃)
Range of application
BD400 Cement shape 5kg/group 1h 48 hours Used in the paste of wear resistant
ceramic tile on the equipment of
suffering from material erosive wear under
the high temperature working condition of
electric power,metallurgy,cement, mining and
other industries,especially suitable for welding
the ceramic bottom lining and seal under
the temperature of 350 degree  working condition
item color density
(g/cm3)
shear strength
(kg/cm2)
GB7124-2008
impact strength
(J/cm2)
GB6328-1999
tensile strength
(kg/cm2)
GB6329-2008
compressive strength
(Mpa)
GB1041-2008
working temperature
(℃)
BD400 gray 1.43 25 27 761 76.3 -60-300

How to use:
1.Surface treatment: Grinding or sand blasting to clean up the dust,greasy dirt and rust on the surface of adherend,
clean it by cleaning agent in the end.

2.Configure adhesives: Make A and B two components mix uniformly according to the specified percentage(1000:15)

3.Using adhesives: Make the mixed-up adhesives spread coating on the surface of adherend uniformly.

4.Curing: Initial curing for 4-5 hours at the room temperature, fully curing for 2-5 days,or heat it up to the temperature of 80℃ and keep this temperature for 2 hours,then heat up to the temperature of
150 degree and keep this temperature for 2 hours for curing, if the time is urgent,can use hot air to cure,it can be fully
curing in half an hour at the temperature of 230 degree,if the product is not in a hurry to install,you had better place it for a period of time to  fully cure naturally.

Packaging specification:
Packed in a plastic drum, A component: 4.93Kg/drum, 4 drums/carton; B component:75g/bottle

transportation and storage:
Sealed storage in the cool and dry place. The warranty period is 1 year. Avoid placing it upside down,
knocking against and transporting it as a non-dangerous product during transportation.

Product packaging photo of BD400 anti wear abrasion high temperature resistant ceramic tile bonding epoxy adhesive:

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s