BD7041 high temperature anti chemical impact corrosion abrasion wear epoxy coatings
used in Zunhua iron mine tailing pump guard plate pipeline alumina ceramic rubber lining repairing and protecting
Maintenance workpiece:tailings pump guard plate ceramic rubber liner pipeline,tailings pump guard jacket
Material: High chrome alloy.
The condition before repairing: perforation scrap part
BD7041 tailing pump repair epoxy compound super anti abrasion wear resistant coating,BD426T special undercoat.
Angle grinder,wire brush,plaster knife,plastic knife,rubber hammer,special rounding tools,hair brush,electronic scale.
Auxiliary materials: cleaning agent,duster cloth,gloves.
Construction technology of BD7041 super anti wear abrasion resistant slurry pump repair epoxy coatings:
1.Clean up and polish pending-repair workpiece on the needing-repair part.
2.Configure BD426T special undercoat and brush coating on the pending-repair part.
3.Configure BD7041 tailing pump repairing super abrasion wear resistant epoxy coating and make it be coating on the
pending-repair part,knock on it to be compacted with rubber hammer,then trim the surface with special rounding tools,
make the surface be flat and smooth.
4.Curing for 24 hours,when the temperature is low,should take heating measures to promote the curing.
Material utilization amount:
13Kg BD7041 super wear abrasion resistant slurry pump epoxy compound repairing coatings,
0.5Kg BD426T special undercoat.
Range of application for BD7041 tailing pump anti wear corrosion resistant epoxy repair coating:
Used in the repairing and pre-protecting of slurry pump,cyclone,classifier,jet flow machine,grit mouth,slurry blender
and the transporting pipe elbow of heavy medium erosive wear.
Construction case photo shows: