wear resistant epoxy bonding industrial ceramic & adhesives

BD181N high temperature wear resistant epoxy bonding industrial ceramic tile adhesives

http://www.wearcoating.com/abrasion%20resistant%20ceramic%20adhesive/wear_resistant_epoxy_bonding_industrial_ceramic___adhesives_4688.html

Product name:
Three in One whole vulcanization type industrial ceramic rubber lining wear resistant bonding epoxy adhesive:

Product description of BD181N ceramic rubber lining abrasion resistant epoxy adhesive:
We use this product to make the spherical surface corundum ceramic tile or reinforce flat surface corundum ceramic tile insert into the
special rubber to form lining plate,then make the rubber lining plate and steel plate be vulcanization in together to form ceramic+rubber+steel
plate composite type abrasion & impact resistant lining plate,there is welding bolt on the steel plate surface between the steel plate and rubber,
thereby it is more convenient for you to install and dismantle.

Range of application:
It is widely used in the impact resistant and abrasion resistant protection of feed chute and hopper etc.This product is divided into spherical
surface reinforce composite type(TCM-K-2) and flat surface reinforce type(TCM-K-1) two forms.(we could process various models and
sizes lining plate according to customers’ drawing)

Product specification:

Projects/Models TCM-K-1 TCM-K-2 TCM-QP-1 TCM-QP-2
Ceramic tile size 17.5X17.5X10mm 17.5X17.5X13mm 20X20X10mm 20X20X13mm
20X20X6.5mm
Lining plate size 250X250X18mm 250X250X21mm 315X210X18mm 305X210X12mm
250X250X21mm
Packing(pcs/ctn) 16 16 15 16

Abrasion resistant corundum ceramic porcellanic index:
Hardness(HRA)                              ≥ 85
Compressive strength(Mpa)             ≥ 850
Volume Density(g/cm3)                   ≥ 3.5
Wear resistance(g)                           ≤ 0.0005
(P=74N,n=800,t=30 min)

Rubber lining plate technology index:
Tensile strength (Mpa)                                                 ≥ 13
Elongation at break (%)                                                ≥ 300
Rate of the permanent deformation (%)                          ≤ 30
Shore-A hardness                                                        60-70
The bonding force between rubber and ceramic (Mpa)    ≥ 3
The adhesion between lining plate and metal (Mpa)          ≥ 2.8

Adhesive technology index:
Appearance:                                 Grey and yellow
Shear strength:
(Curing under water)                      ≥10 Mpa
(Room temperature curing)             ≥15 Mpa
(150 deg C curing)                         ≥16 Mpa

Product photo of BD181N anti abrasion high temperatute resistant industrial ceramic tile bonding epoxy adhesive:

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s