conveyor belt strengthening liquid anti wear rubber coating

How to use of conveyor belt strengthening liquid anti abrasion wear resistant high bonding strength epoxy rubber coating
1.Clean up the pending-smear area and dry it in the air.
2.Polishing the surface layer with electric wire to come out the fresh rubber base material.
3.Wipe off rubber powder from surface with toluene or dry duster cloth.
4.brush coating the prime coat and dry it in the air for 30 min (can not be operation on a rainy day or during the big air humidity).
5.According to the mass ratio A: B = 4:1,preparation of  liquid wear abrasion resistant rubber coating,and brush coating on the surface of conveyor belt,
it can be starting up after curing for 6-12 hours.
Note:The usable time of well mixing liquid anti wear abrasion resistant rubber coating is only 10-15 min,should finish brush coating within the
operation time limit.
938n%e5%89%af%e6%9c%ac
Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s