super high temperature heat thermal conduction adhesives

BD106 super high temperature resistant heat conduction
thermal conductive epoxy adhesives

http://www.wearcoating.com/thermal%20conductive%20adhesive/super_high_temperature_heat_thermal_conduction_adhesives_4432.html

Product description of BD106 heat conductive super high temperature resistant epoxy adhesive:
It’s the thermal heat conductivity structural adhesive which taken advantage of the atomic and molecular structures
feature in terms of heat conduction and the bonding performance of inorganic material to do the effective optimization,
recombination and configuration.

Range of application of BD106 super high temperature resistant epoxy heat thermal conduction adhesive:
Widely used in bonding among needing thermal heat conduction parts in the military industry,high-tech products.Such as applied to hot electron device,pyroelectric sensor,new type power supply,electronic equipment,
thermal measurement,refrigeration equipment etc.

Operation time:
After making the A and B two components mix uniformly according to the mass ratio A:B=6:1,the operation time is
40 min at room temperature.

Curing condition:
Curing for 2 hours at room temperature after smearing the adhesive,then heat it up to the temperature of 80 degree and
keep this temperature for 2 hours,and then heat it up to the temperature of 150 degree to 350 degree and keep this
temperature for 2 hours.The curing time is connected with the coating thickness.Know more about this technology,
please call me at:86-0710-3618317.

The performance before curing:

A component B component
Chemical type Inorganic material Ludox
Appearance Black powder Liquid
Proportion @25℃ 2.1 1.28
Viscosity,5rpm@25℃,mPa.s 960
Particle size,um ≤50
Storage period 12 months 12 months

Material performance after curing:

Density,g/cm3 1.98
Glass transition temperature,Tg
Range of temperature resistant -40~1200℃
Hardness (Shore D) ≥90
Shear strength (Mpa) ≥3
Heat conductivity(W/M.K.) 1.16~1.21

How to use:
1.Should keep the pending-bonding surface be clean and dry before bonding.

2.This adhesive is the double components adhesive,make the A and B two components mix uniformly
according to the mass ratio A:B=4:1

3.Make the mixed-uniform adhesive be coating on the pending-bonding surface.

4.Curing for 2 hours at room temperature after smearing the adhesive,then heat it up to the temperature of 80
degree and keep this temperature for 2 hours,and then heat it up to the temperature of 150 degree to 350
degree and keep this temperature for 2 hours.

Notes:
1.When the environment temperature is higher or mixing quantity is larger,the operation time will be shorten.

2.Sealing for storage in a cool and dry environment,transport it as a non-dangerous product.

3.This product is a non-dangerous product,but don’t make it touch with mouth and eyes,
the allergic constitution should use it more carefully.

Product packaging photo of BD106 super high temperature heat thermal conduction adhesive epoxy coating:

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s